IMPORTERS AND EXPORTERS OF FERROUS AND NON-FERROUS METAL SCRAP GLOBALLY

END BUYERS / EXPORTERS OF METAL AND STEEL SCRAP GLOBALLY

Required specification for Used Rails R50-R65

1.0m (0.8 – 1.0m). Scrap/Rail Ferrous Scrap (R50/R65) chemical composition shall be according to: R50 GOST 7173 -75 weight 51.67 kg/meter R65 GOST 8165 -75 weight 64.72 kg/meter C = 0.54% - 0.82% Si = 0.18 – 0.40% Mn = 0.60 – 1.05% S = 0.04% - MAX P = 0.035% MAXAs = 0.01 Max of mass share Original length: 12.5m 
Used Rails must be cut into buyer preferred size id 1.5m to 3.0m,put in individual bundles before loading  in bulk 

Required specification for Copper wire scrap

99.99% Copper Wire Scrap Wire diameter: 0.20mm, 0.25mm, 0.30mm Weight: 3kg, 5kg, 7kg, 15kg, 20kg Purity:99.9% min Packaging Details:50kg per bale , 1000kg per bundle ,or Customer Specific Requirements. Tensile strength: 1000 N/mm2, 900 N/mm2, 500 N/mm2, 450 N/mm2, N/mm2,HMS metal scrap must be load in bulk on maximum quantity per ship load before shipment 

Required specification for HMS Metal Scrap

(Heavy Melting Steel Scrap). It is the generic term for most types of heavy steel scrap, normally cut to a size not exceeding 1.5m x 0.5m. It may and will consist of cut lengths of pipe, re-bar, angles, steel poles, H or I beams, ships plate. HMS 1 is the term for heavier scrap which has a density of at least 0.7 tons per cubic meter, whereas HMS 2 would be lighter steel scrap such as thin wall tubing (eg bicycle frames), sheet scrap less than 3.2mm thick and so on. HMS 2 may contain galvanized and blackened steel whereas HMS 1 does not.
+44(750) 823-0159
umpiresteel@umpire.com
C/O Cloch Solicitors, 
94 Hope Street, Glasgow, 
Scotland, G2 6PH
United Kingdom
Search